AK - 47 Proof

NIJ Level 3 and NIJ Level 4 bulletproof coating is a plaster mix with exceptional ballistic impact resistance. Our Ballistic panels have superior ceramic like strength and hardness qualities that are designed to offer ballistic protection against all handgun bullets, most rifle bullets, and armor piercing rounds.

In hostile environments where safety from small arms fire is needed,  BallistiCrete offers the protection you need. H.P. White Laboratory tested and passed NIJ Level III and NIJ Level IV Armor Piercing. Tested against 7.62 x 39 AK and 7.62 x 51 NATO, 30.06, .30AP, .40 Cal. 9mm, 357 magnum, .44 and .45 magnum, multi shots Uzi automatic machine gun fire and even Desert Eagle .50 caliber rounds, BallistiCrete can stop penetration into the structure.

details

Easy to apply to the substrate for quick application, turns almost any room into a “safe room” protected environment. If you are looking to convert existing rooms or buildings into bullet resistant environments without calling attention to local threats, interior coatings can be applied quickly and quietly without the need for specialized machinery. 

It is environmentally friendly while providing strength, durability and economy. It forms a strong bond to many substrate materials such as cement blocks, cement board, gypsum board (drywall) brick and stucco with tensile and bond strength exceeding the strength of the substrate in many cases.

application

It can be applied as a single coat from 5/8” or incrementally layered up to 2” thick depending on application. A paint finish is recommended after complete curing has taken place in 5 days. Material is a natural off white color and is pre-blended and mixed with conventional plaster mixing equipment. It can be pumped and sprayed or hand troweled. This is specifically good for creating bullet resistant safe rooms in schools, government facilities, and even your home.

performance

Provides a hard, durable coating over many wall surfaces, over 8,500 PSI (typically 9,000+ PSI) compressive strength (Per ASTM C109)

• Applies directly over gypsum board, EPS foam, existing stucco, cement board, CMU blocks or wood substrates using mesh impregnated BallistiCrete.

• Noncombustible building material (Per ASTM E136)

• Zero flame spread, and zero smoke developed indices (Per ASTM E84)

• Resistant to mold and mildew growth (Per ASTM G21)

• When applied over EPS foam, BallistiCrete™ meets ICC building code required fire protection requirements (Per UBC 26-3; NFPA 286; and IBC Section 803.2.1, Corner Room Fire Tests).